Posts Tagged ‘Power’

Do It Yourself Solar Power – 4 Large Cups Of Coffee And You’Re Done!

Do It Yourself Solar Power can help you save money and lessen carbon footprint. I learned how to do it after drinking 4 large cups of coffeeâ?¦

My neighbor said it was impossible to make a do it yourself solar power system because itâ??s fairly complicated and the process would require someone with high technical skills.

Well, Iâ??m glad I didnâ??t listen to him!

Solar panels are expensive yet I still wanted to avoid using electricity to power my work shed.  So what else?

I had to go the DIY route. I had to give it a fair shot at the very least!

Okay I have to admit that my first do it yourself solar power project wasnâ??t a bed of roses. Putting the components together was an absolute nightmare!

Whatâ??s the hardest part of all?

Well, soldering the cells was something I didnâ??t enjoy at all. But like I said, the entire assembling process was a nightmare!

My fault to be honestâ?¦

I was an amateur who tried to act like a pro.

See what happened was I discovered an instruction online. It was pretty detailed but it was also 100% text�There were no photos, no illustration plans, nothing of that sort.  

So I viewed the instruction thoroughly and followed each step very carefully.

No good!

I failed my first do it yourself solar power project! The wiring and soldering section was all jumbled up!

So I went searching online and long story short. Found what I was looking for â?? amateur friendly video instructions along with printable manuals with photos.    

1st Step to Success

I drank a large cup of coffee while viewing the videos and manuals.

2nd Step to Success

Rolled up my sleeve and got to work again.

3 cups of coffee later and I got my first solar panel set up. The wiring, solar cells fixed to the plywood panel, plexiglass framing â?? basically the whole shebang done!

The moral of the story?

If youâ??re an amateur, try to get detailed tutorials, where each process is delivered in a clear fashion. A successful do it yourself solar power project can be done in less than 210 bucks once you get all the details right.

Quite frankly, do it yourself solar power is not all that difficult.

Once done you can start reducing your electric bills and then maybe you might want send an apology note to your power company. Sounds good?

If so, just go to -> http://www.howtobuildyourownsolarpanel.com/ to get download info for manuals and videos.

Categories: Plexiglass   Tags: , , , , , , ,

How to Build Solar Panel — Putting Together Different Solar Power Generator Components

The easiest way to learn how to build a solar panel is by taking a look at how to assemble major components together. Today, you’re in for a treat. Because this article shows you how, so you too can build for yourself a solar power generator that can send power to your appliances.

Connecting the Solar Cells

Each solar cell produces half a volt. To get eighteen volts, you have to join thirty-six solar cells in series. You should always make calculations to ensure that power generated by your solar panel is sufficient. Otherwise you will have to connect more cells in parallel so you can have enough voltage and current.

The reason we need an eighteen-volt output from the solar generator is because this is what’s necessary to charge a twelve-volt battery. A twelve-volt supply is not sufficient to charge a twelve-volt battery.

Constructing the Panel Frame

Next, we have to create the frame. This is a simple box for the photovoltaic cells to sit in. The borders of the box should be three-quarters of an inch wide and should not be too high. Otherwise sunlight will not be able to reach some of the photovoltaic cells (at the sides) when the sun shines from an angle. This will lower the overall efficiency of the panel as some photovoltaic cells will not receive full solar radiation.

Putting the Array of Cells Into The Solar Panel Frame

To get the solar cells into the frame, glue the array of solar cells onto a thin, rigid backing before placing it into the “box”. An example of a thin, rigid backing is a Masonite board.

We need to give the rigid backing (substrate) a few coats of paint before pasting the photovoltaic cells on. We must also apply a few coats of paint to the panel frame and dry it thoroughly before putting in the array of solar cells.

Connecting the Diode

You can place the diode inside the solar panel and hold it firmly with some silicone so it won’t move about. Remember to allow some slack in the cable so they will not be strained and start pulling on the components.

Covering with Plexiglass

Before you cover the solar frame with plexiglass, test the solar panel’s voltage and power output. Then carefully attach the plexiglass onto the solar panel frame using screws.

Attaching the Jones Plug

Finally, you have to solder a Jones plug to the end of the wires that come out of the panel. This completes your solar generator.

After hooking up the different parts in the above manner, you have made for yourself a solar power generator that can supply renewable energy to your appliances that run on twelve-volt direct current.

John Greenspan is a DIY solar panels expert and has build several solar power generators in his spare time. Are you interested in building DIY Solar panels? Pick up your FREE “How To Build Solar Panels” eBook at => http://www.diysolarpanelsworld.com

Categories: Plexiglass   Tags: , , , , , , , ,

Renewable Solar Power – 3 Top Tips To Solar Power Your Home

An increasing number of people these days are turning to alternative sources of energy. It does not come as a surprise, what with fossil fuel prices going up by the day and the rising levels of environmental pollution. Renewable solar power has emerged as the frontrunner among all alternative sources of energy. The power of the sun can be harnessed to generate cheap, clean and renewable energy. If you are a homeowner looking to reduce energy bills, then renewable solar power could be the right option for you. Making a solar power system for your home too is not that difficult a proposition. These days there are many useful guides available, which come with detailed step by step instructions, using which you, can the system yourself. In fact, the entire process could be weekend fun for the entire family. Let us take a look at some proven tips that can help you produce renewable solar power in your backyard.

Create Free Electricity & Generate Solar Power at Home Today

Tip#1: You will first of all need to have a detailed plan about how you are going to set up the system that is going to produce renewable solar power for your home. Once you have got the plan, then you must get ready all the materials to make up for the various components that will go into making one. Plexiglass sheet, wires, solar cells, plywood and silicon sealant are some of the things that you will need.

Tip#2: You should choose the right location for placing the solar panels in your home. The place should be such which receives plenty of sunlight throughout the year. Ideally a terrace, balcony or a sprawling lawn are good places to place solar panels.

Tip#3: Make sure that using renewable solar power is allowed in your area. The rules generally differ between cities and it is always better that you check with the local authorities.

Now Pay Close Attention Here-
Are you seriously looking for a proven way to save money on your electricity bills? There is a Guide which will help you to Build solar power at home. You will be surprised to know that how easy it is to Build a solar panel at Home, that will not only save your money but you will help in cleaning the environment. Check the Guide

Categories: Plexiglass Sheets   Tags: , , , ,

Solar Power and Energy Top Tips

An increasing number of people these days are turning to alternative sources of energy. It does not come as a surprise, what with fossil fuel prices going up by the day and the rising levels of environmental pollution. Renewable solar power has emerged as the frontrunner among all alternative sources of energy. The power of the sun can be harnessed to generate cheap, clean and renewable energy.

Making your own solar and wind power for less than $200

If you are a homeowner looking to reduce energy bills, then renewable solar power could be the right option for you. Making a solar power system for your home too is not that difficult a proposition. These days there are many useful guides available, which come with detailed step by step instructions, using which you, can the system yourself. In fact, the entire process could be weekend fun for the entire family. Let us take a look at some proven tips that can help you produce renewable solar power in your backyard.

Making your own solar and wind power for less than $200

Tip #1: You will first of all need to have a detailed plan about how you are going to set up the system that is going to produce renewable solar power for your home. Once you have got the plan, then you must get ready all the materials to make up for the various components that will go into making one. Plexiglass sheet, wires, solar cells, plywood and silicon sealant are some of the things that you will need.

Tip #2: You should choose the right location for placing the solar panels in your home. The place should be such which receives plenty of sunlight throughout the year. Ideally a terrace, balcony or a sprawling lawn are good places to place solar panels.

Tip #3: Make sure that using renewable solar power is allowed in your area. The rules generally differ between cities and it is always better that you check with the local authorities.

Making your own solar and wind power for less than $200

Best Residential Solar Energy Systems and other Related Resources:

Magniwork Magnetic Energy Generator – How would you like to create a generator which creates free electric energy? Using our easy-to-follow guide, you will be able create a Magnetic Power Generator which creates absolutely free energy, and doesn?t require any resource like wind or solar energy to function, the magniwork generator creates energy by itself and powers your home for free. The generator works fully off the grid.

GreenDIYEnergy is a guide on how to start generating your own green energy at home. Developed by Ultimate Results, LLC, GreenDIYEnergy’s page promises to give users a step-by-step video and manual on building and installing their own personal solar panels. GreenDIYEnergy’s site also gives users a snek peek at the video that shows them how to buld and install their own solar panels.

Homemade Energy is fast becoming the buzz word in environmental circles. Consumers are becoming fed up with the problems associated with using conventional energy resources. Tired of rising costs, changing our lifestyle and in some cases being subjected to rationing, many home owners are turning to the newest trend in energy conservation DIY Solar Power Kits. A number of companies are now producing homemade energy guides, available for instant download on the internet, which give you step by step instructions on how to assemble the materials for your own DIY solar power kits.

Categories: Plexiglass Sheets   Tags: , , ,