Acrylic PVC Plastic Line Bender Video
Acyrlic Plastic Line Bender with Top & Bottom Heater Easy to use workbench plastic line bender/heater is ideal for the heating and manual folding/bending of:- PP/PE/PVC/ACRYLIC/PETG & POLYCARBONATE. Materials. The heating temperature is set and monitored by a digital thermostat. The Type TGm.O Plastic Line Bender is built on an aluminium frame and has black heat emitters as its heating system. The advantage of a top heater means it can simultaneously heat both sides of a plastic sheet Therefore, enabling the machine to heat up to 15mm thick material. There is also a digital timer with an acoustic alarm signal, this indicates when the sheet is ready to remove. A teflon coated heating sword can be fixed to the top heater. This allows the simultaneous heating and butt welding of PE and PP sheets from 6mm up to 15mm thick.
In chamber plasma video
Pump rated to 10 pascals, voltage was 2100 volts at a few tens of miliamp AC (prob like 100 watts) Setup: This is not DC, so true positive or negative, the thing emanating plasma is a large bolt, the sound you hear, the humming, is the actual sound of the plasma because it is AC and thus the plasma breaks every 1/120th second. The camera is actually in the chamber, which happens to be my mom’s small cooking pot lol. There really wasn’t a point to this experiment other than to put the camera in with the plasma. The beginning red color is the lid, which is hard red plexiglass sheet.
Categories: Plexiglass Sheets Tags: chamber, plasma, video